Skip to main content

111 South Road, Bedford, MA 01730

Tues- Sat 10-6, Sun & Mon CLOSED

 (781) 275-7799

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools/Maintenance

$9.50 - $10.00
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
$41.50
Wheels Manufacturing Sealed Bearing Extractor - 10mm Fits the following bearings: - 6704 - 6804 - 6904
$62.50
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
7-piece tapping drill bit set in a stable plastic box for the cutting of metric threads. The hexagonal bit shaft ensures very good power transfer. The finely-tuned material elasticity makes for great durability. Perfect chip removal and a low tilt risk. The Rapidaptor ensures rapid bit change without any extra tools. - Ideal for mobile repair and assembly work - Rapidaptor holder for rapid bit change - 1/4" drive suitable for power screwdrivers - Rapidaptor universal holder, non-magnetic, and tapping drill bits with 1/4" drive - In practical and robust plastic box
$49.00
High-quality L-key set with color-coded, convenient plastic sleeve. This ensures that the tool is quickly to hand and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. - Hex-Plus allows socket head screws to live longer - Hexagonal ballpoint on the long arm - With Take-it-easy tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures
$173.47
Wera torque screwdriver. Kraftform pistol handle for particularly high torque transfer, multi-component for high working speeds and ergonomic screwdriving. Variable torque setting option with highest precision. Featuring an easy-to-read scale value, you can make simple adjustment of the required torque value without any special tools. Multi-component Kraftform handle with hard and soft zones for high working speeds, while being easy on the hands. - Unlimited torque to loosen seized screws - Suitable for bits with 1/4" hexagon head drive - Adjustable Kraftform torque screwdriver with pistol handle and Rapidaptor quick-release chuck - Suitable for bits with 1/4" hex head drive - Rapidaptor quick-release technology for rapid bit change - Distinct signal when pre-set value is reached - Numerical torque value indicator
Never leave safety behind. Topeak's Mini 18+ folding tool lets you take it all with you without weighing you down. Its forged-aluminum body holds 18 tools including: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches, a T25 Torx wrench, 14- and 15-gauge spoke wrenches, a cast-chromoly chain tool, aluminum tire lever, Phillips and flat-blade screwdrivers, and a bottle opener.
$9.00
Topeak's CageMount is an easy way to attach an additional water bottle cage to your handlebar or seat post. Provides convenient access to an extra water bottle during extended commutes or when cycling in warmer weather.
$29.95
TorqSocket kit works with any mini-tool containing a 5 mm Allen wrench (or single 5 mm Allen key). Applies correct torque on component bolts for safety and to prevent damage to carbon parts. - Includes 3,4.5mm hex bits, T20 & 25 Torx - Packaged in own carrying case - Material: Hardened steel - Size: 2.1" x 2" x 0.9" - Weight: 75g
$20.00
- 5 DART plugs for use with the Stan's NoTubes DART tool
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
$5.00
TL-EW300 Di2 Cable Tool
$12.00 - $30.00
Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic
$7.00 - $12.00
SRAM's Ceramic Bearing Grease is perfect for maintaining your SRAM components that feature ceramic bearings. This high-tech lubricant minimizes friction to maximize your performance and it keeps your SRAM components going strong year after year. Plus, the 10ml syringe container makes it easy to grease your parts, too.
$85.00
- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes - Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes
$5.00 - $37.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
$17.00 - $23.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$17.00 - $45.00 $17.00 - $50.00 Up to 10% Off
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$21.00
- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting
$46.00
Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.
$50.00
RockShox, 11.4118.038.001, Service kit, Monarch XX B1 2014+
$60.00
- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+
$8.40
ProGold Prolink Cable Luber .25oz ProLink lubricant in a convenient, refillable applicator. - Lube and clean cables - on the bike - in minutes - Restores old or corroded cables - Year-round protection against rust and corrosion - Compact and easy to use - No product waste - Non-staining
$12.00
ProGold ProLink is designed to shed dirt, mud, and abrasives, and reduce tacky build-up in all climates. - Smoother shifting, quieter drive train - Repels moisture and reduces oxidation and corrosion - Disperses water and resists wash-off - Will not build up or get tacky - Works well in all climates - Longer chain and sprocket life - Long-lasting - Can be used as a dry lubricant - Environmentally friendly - Available in: 4 fluid-ounce drip, 8 fluid-ounce aerosol, 16 fluid-ounce pump, and 32 fluid-ounce.
$12.00
- Xtreme chain lube is formulated for long-distance and extreme off-road conditions - MFR bonds to metal surfaces and resists build-Up and tackiness, in addition to shedding water
$13.00
- Provides quick and powerful grease and grime cutting action for heavy-duty cleaning - Derived from natural ingredients
$16.00
- Consumer grade water-based silicone bicycle polish - Safe on all parts including carbon - Protects against uv rays, water and dirt
$12.00
- Compact and robust 6 function multitool - Resin body - Lightweight design - Hardened steel bits - 6 functions - Hex: 3, 4, 5 and 6 - Screwdrivers: PH2 and Flat
$15.00
- Compact and robust 6 function multitool - Resin body - Lightweight design - Hardened steel bits - 10 functions - Hex: 2, 2.5, 3, 4, 5, 6 and 8 - Torque: T25 - Screwdrivers: PH2 and Flat
$16.00
This 8mm pedal wrench is chrome plated for strength, has a dual compound handle for extra grip and comfort, and has an additional ball driver on the bottom of the handle for fast pedal installation and removal.
$29.00
Simply Accurate – Maintenance-free, Reliable and Affordable Our torque tools use intelligent design for accuracy without the need for expensive calibration. An industrial-grade internal spring manufactured within extremely tight tolerances pre-determines torque setting. The tool does not need to be set into calibration and cannot shift out of calibration. Easy to use Ergonomic handle fits your palm with a four-finger grip to make wrenching easier. Tool provides an unmistakable 20 degree overrun when the torque limit is reached. Users can be confident knowing they have the correct tension. Low profile allows the tool to fit into more places for use, overall 60% lower height than tools costing twice as much. Use it like a tool – safe to un-screw! Prestacycle's TorqKey is fast and easy-to-use as an everyday tool. Color-coded tension markings on both sides make it a quick-grab on your workbench. 50% thicker walls in the bit shaft make our tools stronger and more reliable than others. They provide Torque relief in the right (clockwise) screw tightening direction, and hold firm in the left (counterclockwise) unscrew direction. You can unscrew fittings that were just tightened with the TorqKey. This is very handy when making multiple attempts to get a cable adjustment just right. NOTE: Do not use TorqKey to remove stuck, damaged, rusted or over-tightened fittings. More Options Prestacycle TorqKeys are available in 4Nm, 5Nm, 6Nm, 7Nm, 8Nm, 10Nm and 12Nm. Combine TorqKeys with our Ratchets and Bit sets to make a more complete tool set for Bicycle servicing. Standard Magnetic Hex Tip works with our 20 Piece Bicycle Bits set, our long Bicycle bits and any other 1/4" Hex bits. Prestacycle TorqKeys are different… designed from the start with real-world experience on Bicycles. Specifications: - Torque value accurate to + / – 10%. - Provides 20 degree overrun when maximum torque is reached. - Overrun provides user with unmistakable feedback when torque value is reached. - Polymer T-Handle ergonomically designed for comfortable four-finger & palm grip. - Color-coded tension markings on both sides. - 12mm wide Zinc shaft has 50% thicker walls – stronger than other Torque tools. - Magnetic 1/4" hex bit retention makes bit changes easy. - Torque accuracy life-cycle exceeds 5000 cycles. - Simple to Judge – If the logo is worn, the tool is past life. - Replacing the tool costs less than other tool's calibration service. - Height: 64.5 mm, 2 1/2 inches. - Width: 81 mm, 3.18 inches. - Weight: Approx. 75 grams. - 1 Year limited consumer warranty. Disclaimers Check with the manufacturer of your components and fittings for proper torque specifications. Always follow Manufacturer guidelines for installation and removal of nuts, bolts and screws.
$13.00
Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. The final blending of rust inhibitors and extreme wear additives happens at our facility before the product is bottled and shipped. - Ultimate protection and durability for metal-metal contact - Base oil with rust inhibitors and anti-wear additives
$6.00
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
$14.00
- Precision laser-cut tool steel. - Features 7mm & 8mm flare wrenches plus rotor truing slot. Driven by a request from mechanics in the pits every day, and sure to become a favorite, the Disc Wrench features 7mm and 8mm flare style box wrenches needed for the delicate hose fittings found on hydraulic disc brakes. The compact wrench also features a disc rotor truing slot and is made from precision laser cut tool steel.
$16.00
- New extra-long 27cm hex key and second ball-end deliver leverage and speed - Specifically designed for quick and easy installation and removal of pedals and cranks - Ergonomic dual-density screw driver handle - Designed to stand up to the harsh conditions of professional use Pedals featuring a back-side hexagon broach are now standard on many modern bicycles in 6mm and 8mm sizes. Pedro's led the way with our 6mm hex pedal driver specifically designed for quick-and-easy pedal installation and removal. Features include an ergonomic dual-density screw driver handle for comfort and control, a new extra-long 27cm hex key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-treated S2 tool steel construction for the ultimate in strength and lasting performance. Backed by Pedro's lifetime warranty.
Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. The TAP-9 is 6mm x 1mm for cantilever brakes and large fender bosses.
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless forks. Slide on the guide, clamp it down and the hardened-steel cutting slot ensures a perfect cut every time. You can remove as little as 1mm, too.
$4.00
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
$5.00
Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.
$8.95
• 12” Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. • Fits Park Tool SAW-1 Hacksaw and most 12” hacksaws • The CSB-1 is designed for use with the SG-8 Saw Guide. NOTE: Similar to a grinding stone, do not use this blade on aluminum
$8.95
Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.
$8.95
Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.
$9.90 - $18.95
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)
$9.95 - $14.95
Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.
$9.95
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 23mm size fits Shimano 15mm through-axle hubs. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
$10.95
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
$10.95
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
$10.95
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.
$12.00
A diminutive version of Park's world famous fold-up tools, the Micro Fold-Up Hex Key set features 3, 4, and 5mm hexes, a T25 Torx compatible bit, combo screwdriver, and a key ring holder, all in a tough composite case. 2.25 inches (57mm) long
$12.00
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
$14.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$14.95
The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings
$15.95
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
$15.95
The BBT-16 removes and installs the self-extracting/one-key release caps on SRAM and RaceFace cranks with a 16mm hex hole. Features investment cast steel construction and an option to use 8mm hex for better leverage.
$15.95 - $20.95
Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions
$17.00
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
$19.95
The use of cutting oil or fluid is extremely important when performing any cutting, tapping, facing or reaming operation and Park's Cutting Fluid is a high quality, environmentally safe cutting fluid that extends tool life and makes any frame prep job easier and safer. CF-2 can effectively be used on all metals.
$19.95
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.
$23.95
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
Page 1 of 2 Next page