Filter By:
- Bar Ends (2)
- BMX (1)
- Bottom Brackets (27)
- Brakes/Levers/Pads (64)
- Cables (12)
- Cassettes/Freewheels (38)
- Chainrings (29)
- Chains (28)
- Show More Categories
- Cranksets (15)
- Derailleurs (36)
- Forks (3)
- Handlebar Grips/Tape (33)
- Handlebars (10)
- Headsets (15)
- Pedals (41)
- Saddles (16)
- Seatposts (10)
- Shift/Brake Combinations (7)
- Shifters (13)
- Stems (17)
- Other (120)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.

$18.00 - $28.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$18.00
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- Reach Adjustment
- Qwik-Adjust Barrel Adjuster
- Compatible with mechanical disc brakes and linear-pull brakes

$20.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

$25.00 - $32.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$27.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$35.00
Cost effective stopping power from the leader in cable-actuated disc brakes.
- All calipers have 74mm mounting bolt spacing
- For use with with long cable-pull levers
- Mono-block caliper design has outboard pad adjustment
- Spring tension is adjustable
- Includes steel-backed organic pads
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Long Pull
- Rotor Included: No
- Weight: 215 g

$35.00 - $45.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

$43.00 - $60.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

$52.00
Steel single sprockets with galvanized finish.
- Lockring included
- Cassette Body Type: Campagnolo 9 Speed
- Drivetrain Speeds: 9
- Weight: 212 grams (12-23)

$65.00
Thanks to Campagnolo's Ultra-Drive system, the Veloce Cassette offers precise, fluid shifting. The teeth are carefully machined and treated for flawless gear changes and outstanding durability. Plus, the special cog patterns interface perfectly with the rest of Campy's drivetrain components for outstanding shifting.

$66.00
Record chains represent Campagnolo's highest quality and performance chains and are available in 9, 10 and 11 speed versions.
- Hollow pins for reduced weight
- NI-PTFE antifriction treatment reduces friction for smooth pedaling, reduced noise, greater efficiency and longer chain life
- Links (links): 114
- Width: 5.9 mm
- Drivetrain Speeds: 10
- Chain Connection Type: Pressed Pin
- Half Link Chain: No
- Weight: 255 grams

$100.00
Compatible only with Record or Chorus square taper cranks. Features three cartridge bearings and a chromoly steel spindle.
- 3 sealed cartridge bearings, 2 on the drive side, 1 on the non-drive side
- Removable cups are machined from 7000 series aluminum
- Unique taper is not compatible with Shimano
- Weight: 220 grams

$130.00
Campagnolo's Veloce Rear Derailleur uses an advanced-parallelogram design that assures precise and quick shifting. The aluminum construction reduces weight and boosts strength for crisp gear changes. Plus, the pulleys are made from a special material that renders the drivetrain nearly silent.
$12.00
• Replacement hoods for road brake levers with traditional, non-aero cable routing
• Soft, tacky rubber for a sure grip
• Available in black or brown

$36.00
Add another braking option to your road or cross bars with Cane Creek's Cross Top Brake Levers. They are a great way to gain more control on technical cyclocross courses by enabling braking from the tops of the bars.

$39.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: IS42/28.6/H9/K|IS42/30/H1
• Top Type: IS - Integrated
• Top Head Tube Inside Dia.: 42.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 72g

$50.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: EC44/40/H12/K
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.00mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 65g

$63.99
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Uses 36/45 degree crown race and compression ring
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

$70.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: ZS - ZeroStack
• Bottom Head Tube Inside Dia.: 55.95mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 4mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 109g

$70.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

$82.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: IS42/28.6/H9/x
• Top Type: IS- Integrated
• Top Head Tube Inside Dia.: 42.1mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 9mm (Short), 15mm (Tall)
• Top Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 T Aluminum
• Weight: 41.81g

$25.00
Get a grip.
Silicone construction and a round-to-hexagonal tapered profile produce a lightweight and natural-feeling contact point for comfort and control.
Where it thrives:
In competition, challenging trails
What it's built for:
Control, comfort
Highlights:
- Unique 36mm outer hex shape for control
- Rounded 33mm inner profile improves grip
- Silicone construction for comfort

$25.00
Get a grip.
A straight profile, lock-on grip that combines a ribbed, mushroom pattern on the palm side for comfort, and hex-pattern on the underside for grip.
Where it thrives:
Challenging trails, out in the elements
What it's built for:
Control, grip
Highlights:
- Mushroom ribs for comfort and control
- Micro-Hex pattern for all-weather grip
- Single lock-on clamp for security

$40.00
Take a seat.
Comfy makes happy, perfect for everyday with a quilted saddle top keeps things plush.
Where it thrives:
Leisurely rides, in town
What it's built for:
Comfort, durability
Highlights:
- Quilted saddle top for comfort and style
- Steel rails for strength and durability 170mm width

$42.00
Pure comfort.
A saddle with a single purpose, comfort.
Where it thrives:
Leisurely rides, in town
What it's built for:
Comfort, durability
Highlights:
- Optimized foam densities
- Stable chromoly rails
- 188mm width for comfort

$45.00
More comfort, more control.
Quality silicone and an engineered foaming process, produces a great feel with unrivaled all-weather grip that can be washed and re-wrapped.
Where it thrives:
Any road it goes on, out in the elements
What it's built for:
Grip, durability
Highlights:
- Silicone and a hexagonal dimpled pattern provide the perfect balance of shock absorption and grip feel
- Hardwearing and washable construction results in a long-lasting fresh look / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips
- Thickness: 2.7mm, length: 200cm, weight: 165g

$60.00
Designed for use with Cannondale's Headshok (sold separately), the Headshok Stem is tough, light, and ready to ride.
- Sleek styling with maximum strength and stiffness
- Forged from a single block of lightweight 2024 aluminum with our patented OPI 3D forging process, these stems are exceptionally light and strong
- 31.8mm clamp interface
- Weight: 185 grams (100mm length)

$90.00
Lightweight workhorse.
Carbon shaft to minimize road vibration and an alloy head for a rock solid platform for your saddle.
Where it thrives:
The open road, up and down hills
What it's built for:
Stability, control
Highlights
- 400mm/ Lightweight carbon
- Low-profile, infinitely adjustable, and extended rail clamp
- Di2 internal battery compatible

$150.00
Waste not, want KNØT.
Part of the KNØT SystemBar, this aluminum stem helps save six watts over a traditional round handlebar. Not only that, you can adjust the bar position. Have cake. Eat cake.
Where it thrives:
The open road, up and down hills
What it's built for:
Aerodynamics, control
Highlights:
- One-piece looks, two-piece function
- Wind tunnel proven, hides cables
- Compatible with 2019+SuperSix EVO
Page 1 of 18
Next page