Other
$12.00
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes
$6.00
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts.
- Sold as a pair; two bolts and two springs
- M4x0.7mm thread
- Length: 45mm
$5.00
Campagnolo small parts for bottom brackets.
$22.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$269.00
Improve the performance of your 11-speed Shimano rear derailleur with pulleys that reduce friction and increase bearing life. Ours are designed to work with less drag, adding to the power transmitted to the rear wheel.
- Uses low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls.
- A set consists of differing upper and lower pulleys: they are marked as such and have directional arrows etched on them so you know exactly how to install them.
- These pulleys are compatible with all Shimano 11-speed rear derailleurs except XT or XTR.
- The kits come with CeramicSpeed oil in a 15ml dropper bottle. The bearings come pre-oiled.
In the box:
- 2 x 11-tooth pulley wheels
- 4 x spacers
- CeramicSpeed Bearing Oil in 15 ml dropper bottle
- Sticker sheet
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$18.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 18307 Bearing
$20.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6805 Bearing
$20.00
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6902 Bearing
$40.00
- Clamps to a threadless steerer
- Offers up to 4-1/2" stem height increase
- Forged 6061-aluminum provides extra strength
- Machined aluminum top cap is threaded, providing easy installation
$17.00
Dimension Seatpost Clamps
- Diameters: 28.6mm, 30.0mm, 31.8mm, 35.0mm
- Weight: 34g
$26.00
Dimension Stem Column Adaptors
- Total quill length 180mm
- Measurement from minimum insertion to top of steerer adaptor is 118mm
- Alloy
- Quill insertion diameter: 1-inch
Your frame is BB30 or PF30. Your crank is 386EVO. No sweat. This adapter from FSA makes it happen.
- For road use
- Weight: 50g
$2.00
FSA (Full Speed Ahead) Polycarbonate Headset Stack Spacers
$3.00
Alloy headset spacer to fit 1 1/8in fork steerers.
- Alloy with FSA logos
$32.99
If your plan is to install a 386EVO crank into a PF30A or BB30A Cannondale frame, look no further. This adapter from FSA is just what you need.
$6.00
- Replacement V-brake pads
- Wear limit mark
- Ultra-light 6061-t6 forged pad holder
- Compatible with Shimano, SRAM, TRP, and all major brands of V-brakes
$10.00
-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)
$11.00
-Seatpost clamp with rack mount for Giant's Defy/Avail models
$24.00
Features
- Non E-Bike rear-mount kickstand
- Adjustable leg assures the perfect fit for all frame sizes
(Non E-Bike) Fits:
- Seek - 2013-2016
- Roam - 2013-2018+
- Rove - 2013-2018+
- Enchant - 2017+
- Escape Disc - 2017+
- BeLiv - 2018+
- BeLiv City - 2018+
- ATX - 2018+
- ARX - 2018+
- FastRoad 2017
- AnyRoad Adv - 2018+
- Talon- 2018+
- Alight- 2018+
- Tempt- 2018+
- Thrive- 2018+
- Sedona DX- 2018+ (Does NOT fit Sedona or Sedona W)
$29.00
Features
- E-Bike specific kickstand
- Designed to handle the additional weight of battery assisted Giant bicycles
- Adjustable leg assures the perfect fit for all frame sizes
Fits:
- Road-E
- Quick-E
- Dirt-E
- ToughRoad GX-E
- Explore-E
- Vall-E
- Amiti-E
$100.00
-Seatpost clamp for Propel Advanced ISP models (2013-2016)
$17.99
Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy.
- Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems
- Compact design improves performance when used on curved housing segments
$3.00 - $8.00
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$19.31 - $24.00
Clamps for mounting Magura disc brake levers to the bar. Does not include mounting hardware, clamp only.
- Sold individually
$10.00
This pair of 14" long extenders attaches the Old Man Mountain rack frame to the rear of your bike. The extenders have a slot for adjustability, which allows you to level the rack on different types of bikes. Includes hardware.
- 14" length
- Includes slots for adjustability
- Made from 6061 aluminum and powder coated matte black for finish and durability
- Can be mounted to eyelets or to the Old Man Mountain pucks if your bike does not have eyelets
- May need to be bent to fit width of frame
- Includes hardware
$13.00
Don't let chain slap damage your frame. Install a Pro Chainstay Protector. For top protection and a custom look, it's made of heavy-duty carbon-coated neoprene. Plus, it has a Velcro closure so it's easy to put on and stays in place, and it can be removed for cleaning too.
$3.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm
$4.99 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- S.H.I.S. Stem Clamp Diameter: 25.4mm
$8.00
The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.
$8.00 - $9.99
$9.00 - $9.99
Up to 20% Off
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
$17.99
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
$24.99 - $44.99
The Problem Solvers Head Tube Reducers resize your head tube to accommodate different size forks. These fine aluminum reducers are designed for traditional, external-cup headsets. Please contact us for any questions about compatibility with your bicycle.
$39.99
• Allows the use of downtube shifters on bikes without downtube shifter braze-ons
• Compatible with 9/10-speed Shimano shifters
• 31.8mm clamp with shims for 28.6mm tubes
• Shifters not included
$39.99
The Problem Solvers GXP Spindle Adapter Kit lets you adapt a GXP crankset to a BB30 or Press-Fit 30 bottom bracket. It's used with the Problem Solvers BB30/Press-Fit 30 Adapter Kit, which is sold separately.
$40.00
MisMatch adaptors allow users to mount Shimano & SRAM brakes and shifters on one clamp. Available in multiple configurations.
-Annodized Black
-Attaches SRAM shifters to Shimano I-Spec II brake lever clamps
MisMatch 1.2 adaptor fits Shimano brakes: BL-M9020, BL-M9000, BL-M8000, BL-M7000
$40.00
Problem Solvers' MisMatch Adapters allow you to combine your Shimano and SRAM shifters and brakes onto a single clamp for a more ergonomic, less-cluttered handlebar. These CNC-machined aluminum adapters work with Shimano I-Spec and SRAM MatchMaker components to fasten your preferred combination on to a single, existing bar clamp.
$49.99
The Problem Solvers BB30/Press-Fit 30 Adapter Kit consists of DuPont Delrin (a tough, light type of plastic) pieces that allow you to use your external bottom bracket-style crankarms (24mm spindles, such as a Shimano Hollowtech II crank) with newer BB30 and Press-Fit 30 bottom brackets. Please contact us if you have any questions about compatibility.
$49.99
I-SpecBar Clamps are a one-piece hinged clamp adapter that allows users to mount I-Spec compatible shifters or dropper levers onto the handlebar, without requiring an I-Spec brake lever.
- Sold individually, the clamp can be mounted to the right or left side
- Hinged clamp for easy installation without removing other components
- Black Anodized, CNC AL-6061 Aluminum
- Compatible only with Shimano I-Spec II compatible shifters or dropper post remotes
- 23g
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish. - Replacement T20 bolts for WCS C260 stems
- Includes T20-M4x15mm x 4pcs & M5x18mm x 2pcs
- Bit Size: 4mm
- Thread Pitch: M4 & M5
- Length: 4x 15mm, 2x 18mm
$9.95
Replacement bolts for Super Logic stems. Original equipment stem hardware ensures exact fit and finish.
- Bit Size: Torx 20
- Thread Pitch: M4
- Length: 15mm
$0.30
Replacement lower hardware for Rockshox forks.
$8.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$12.00
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$16.00
RockShox 32mm Seal Kit
$21.00
RockShox XC32 Solo Air Assembly
$27.00
RockShox 35mm Seal Kit
$30.00
$31.00
3% Off
RockShox 32mm Seal Kit
$34.00
Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite.
- 34g lighter than Maxle Lite
- Easy installation with a 6mm Allen wrench
$45.00
The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite.
- 34g lighter than Maxle Lite
- Easy installation with a 6mm Allen wrench
$66.53
The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
$125.00 - $167.00
RockShox XLoc Parts
$4.50 - $5.00
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No
$5.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Page 1 of 3
Next page